@nd gen 4runner installing cruiser coils
#1
Registered User
Thread Starter
Join Date: Feb 2008
Location: belton mo.
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
@nd gen 4runner installing cruiser coils
I have a set of rear land cruiser coils for my 90 4runner to fix the rear sag. I was woundering if i can use my factory shocks or do i have to get bigger shocks? The shocks i have on the 4runner now are almost new and i am kinda on a budget so i was woundering if i can leave them on it.
Tony
Tony
#2
Contributing Member
If you're JUST fixing the sag and going back to stock height, your current shocks will be fine.
If you're dialing in any lift over leveling it out, you might want to look at longer shocks.
If you're dialing in any lift over leveling it out, you might want to look at longer shocks.
#3
Registered User
Join Date: Nov 2007
Location: chippawa niagara falls ontario
Posts: 3,278
Likes: 0
Received 2 Likes
on
2 Posts
hey tc..
what other parts would i be looking at besides lc coils and shocks to dial in some lift...i currently have a blown whock and the big 32s lol and bending the bumper... so i was thinking lj coils and springs would be a good option.
what other parts would i be looking at besides lc coils and shocks to dial in some lift...i currently have a blown whock and the big 32s lol and bending the bumper... so i was thinking lj coils and springs would be a good option.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM