waskillywabbit

iTrader: (-1)

If you read the thread you'd know we already chased that "rabbit".

Rock Slide

iTrader: (1)

Exactly. If I was planning on rock crawling this 4Runner or doing some form of racing, then I would have done a cage-to-frame design. 1st Gen 4Runners came with these same roll bars mounted very similar to mine. I simply wanted to incorporate something from a 1st gen in my 3rd gen to seperate it from the crowd.


Yeah, I lucked up. The 4Runner they pulled the roll bar out of at the salvage yard still had it's original pad intact. The zipper had rusted out, so I took it to a local fabric shop were they sewed a new one on. After I cleaned off 20yrs of dirt and grime on the pad, it looked brand new.

Again these pads are a cool accessory b/c Toyota discontinued them sometime ago. However, you can still find them on Ebay for sale. I've seen 3 or 4 for sale on ebay since I've had mine.

ecchamberlin

Brian
I did use nylocks (they rock!) but not the Loc-tite and the really stupid part of this is that I have some. Thanks.

neliconcept

I may have to do this but Id like to keep room for my sleeper platform wheneve rI get it built and a side mounted sub. Would def be a cool place to mount a tire

ADH8796

My roll bar is in and looking good but I'm going to pull it out and paint it and then I'll post up some pics. It also looks like 4x4 fink is going to be doing this mod and hopefully I'll be able to do a slight build up of pics from putting his in.

ADH8796

http://s139.photobucket.com/albums/q...um/Roll%20Bar/

Here are the pics I did a little something different with how I mounted the front bars into the fender wells let me know what you think feel free to ask questions.

4runner9898

where do you find a 1st gen roll bar?

TreyG870

I've seen them pop up in the classified sections now and then. They'll also pop up on Craigslist occassionally.

Also, this thread looks to be about 8 years old, so you may not have much luck getting a reply from the original posters.

vasinvictor

iTrader: (3)

From a 1st gen.

Rock Slide

iTrader: (1)

Eh, us old hats still pop in from time to time.

4runner9898, to name a few: local salvage yards, craigslist, ebay and/or Toyota truck/4Runner forums are great places to being your search.

ShouldaWornGloves

Nice Job! Looks like a well thought out assembly.

SharpStick

I found mine on Craig's; paid $90. San Diego's full of rust-free Toyota parts, but you need to move fast or they go to Mexico to keep trucks with 600,000 miles on the road instead of our mortal American trucks with just 200+ K on 'em.

STICK

BOGDOG

Cool I have an extra factory roll bar from an 85 I parted out. Been wondering what I could do with it.