x250f23x

And..

x250f23x

And some more!

Hope this has been a good update for you.

The more people respond with feed back and comments the more it keeps me active in Yotatech.

Yopar

iTrader: (2)

Excellent...it looks great. Are you trying to keep the rig lower than normal, and that's why you had to raise the engine?

I need to read up on 3 link systems. I have seen 4WU's stuff around, but I am not that versed in links and need to check out some more builds.

x250f23x

I wouldn't call it trying to keep the rig lower then normal, I would call it - I'm just greedy, and I wanted every last bit of up travel I could get. I want more up travel and down travel then leafs can provide.

As for reading up on links, this will bring you up to speed:
http://www.4wheelunderground.com/Suspension-411.html

x250f23x

With the motor mount...

Yopar

iTrader: (2)

Looking forward to seeing the T-case mount installed,...I'm guessing you'll fab some extensions from the street mount > to the frame.

Thanks for that 4WU article.

x250f23x

Yes, some 2x2 .120 square tube will be used to connect this all to the frame, Same for the motor mount perches. Just got word this morning it has been cut and awaiting bending, so I should have this before the end of the week.

Stay tuned!

x250f23x

And it's here!

x250f23x

Welded and bolted, getting longer hardware today

x250f23x

Motor mount perches made and tac'd in

Yopar

iTrader: (2)

I like it! Simple and clean.

x250f23x

RBX

Just got my kit!
Your T-case is really nice, I like it.

x250f23x

Nice! Welcome to the family.

PM me if you'd like a T-case mount like it. We'll get you set up nice.