5vze, r150, dual cases, ect.
#1
Registered User
Thread Starter
Join Date: Aug 2006
Location: Mesa AZ
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
5vze, r150, dual cases, ect.
Please read the following disclaimer!
Right now I have all the parts I need to build up my truck, I'm looking to go in a different direction but I need to sell this stuff first. So what that means is I can't start selling things off until most of the stuff is spoken for. I don't want to be sitting on half of this stuff. I need money to move into a nicer shop.
Toyota dual case. 23 spline front and back, marlin triple drilled flanges 4.7s in the back case. 10 degress rotated cast adapter. Just assembled last week. $1300
Marlin 4cyl tcase to V6 tranny adapter. Never installed $300
'91 Toyota V6 5 speed tranny. $200
'97 3.4L engine out of a 2wd T100 w' 19000 miles. Wiring harness, ecm, accessories, radiator, ect. $600
Marlin Heavy duty clutch, never out of box, $150
Marlin heavy duty tcase mount never installed $90
Front Dana 44, originally from chevy, cut down to match tacoma width. Sky manafacturing hi steer, 4.10s with an aussie locker, Bronze bushings in ujoints with tigged caps. Flange to bolt to toyota driveshaft. 12mm studs
TRD Tacoma rearend 4.10s and elocker. $1000 for both
4 grooved 36" TSLs on beadlocked starsky and hutch wheels, plus one nearly new 36 TSL on a steel wheel for a spare. $800
Sky manafacturing flat pitman arm to fit chevy TRE $60
V6 chain drive tcase. $100
4 15x8 chrome directional wheels for toyota. $50
'90 Toyota Extra cab, V6 5speed 4x4, 4.56s, tubed from firewall forward. 15x8 AR23s with junk 32s, rock sliders, bed box, beard super seats, ect. Runs, drives, and wheels. The tires are garbage and it leaks oil, otherwise it's a fine beater and ready to get built up. $2500
'85 4runner shell. Yup the one that was on here, body, frame and title, Free
Pictures availible just ask. Call with any questions. Travis @ (602) 370-5435. All prices negotiable.
Right now I have all the parts I need to build up my truck, I'm looking to go in a different direction but I need to sell this stuff first. So what that means is I can't start selling things off until most of the stuff is spoken for. I don't want to be sitting on half of this stuff. I need money to move into a nicer shop.
Toyota dual case. 23 spline front and back, marlin triple drilled flanges 4.7s in the back case. 10 degress rotated cast adapter. Just assembled last week. $1300
Marlin 4cyl tcase to V6 tranny adapter. Never installed $300
'91 Toyota V6 5 speed tranny. $200
'97 3.4L engine out of a 2wd T100 w' 19000 miles. Wiring harness, ecm, accessories, radiator, ect. $600
Marlin Heavy duty clutch, never out of box, $150
Marlin heavy duty tcase mount never installed $90
Front Dana 44, originally from chevy, cut down to match tacoma width. Sky manafacturing hi steer, 4.10s with an aussie locker, Bronze bushings in ujoints with tigged caps. Flange to bolt to toyota driveshaft. 12mm studs
TRD Tacoma rearend 4.10s and elocker. $1000 for both
4 grooved 36" TSLs on beadlocked starsky and hutch wheels, plus one nearly new 36 TSL on a steel wheel for a spare. $800
Sky manafacturing flat pitman arm to fit chevy TRE $60
V6 chain drive tcase. $100
4 15x8 chrome directional wheels for toyota. $50
'90 Toyota Extra cab, V6 5speed 4x4, 4.56s, tubed from firewall forward. 15x8 AR23s with junk 32s, rock sliders, bed box, beard super seats, ect. Runs, drives, and wheels. The tires are garbage and it leaks oil, otherwise it's a fine beater and ready to get built up. $2500
'85 4runner shell. Yup the one that was on here, body, frame and title, Free
Pictures availible just ask. Call with any questions. Travis @ (602) 370-5435. All prices negotiable.
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Just Differentials
5
06-13-2022 07:40 PM