buying new wheels -question about offset
10-21-2012, 05:49 AM
#1
Registered User
Thread Starter
Join Date: Dec 2011
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
buying new wheels -question about offset
Will I run into issues if I go with any of these offsets: -6mm, -10mm, or -12mm? My current setup:
2007 4Runner SE 4WD
Overland Warehouse 2.5-inch full susp
BFG A/T 275/70 17 tires
Tore up my stock rims while off-roading the last few times. Time to replace them with some black rims. Looking at KMC, SCS, and ProComp. Currently I have SpiderTrax on with my OEM rims, but will remove the SpiderTrax when I install new rims. Hence the question about offset as I want to have the tires sitting at about the same place as current.
2007 4Runner SE 4WD
Overland Warehouse 2.5-inch full susp
BFG A/T 275/70 17 tires
Tore up my stock rims while off-roading the last few times. Time to replace them with some black rims. Looking at KMC, SCS, and ProComp. Currently I have SpiderTrax on with my OEM rims, but will remove the SpiderTrax when I install new rims. Hence the question about offset as I want to have the tires sitting at about the same place as current.
12-10-2012, 12:13 AM
#3
Registered User
Join Date: Oct 2011
Location: British Columbia
Posts: 259
Likes: 0
Received 0 Likes
on
0 Posts
I would love to see the difference between the 2003 T4r stock 16 inch wheels and the 1998 T4r split 3spoke stock alloys. I tried to install a set today onto my 2003 for winters (possibly new mud tires next year) and the front didnt clear the calipers.
Thread
Thread Starter
Forum
Replies
Last Post
skoti89
Off Road Trip Planning, Expeditions, Trips, & Events
0
07-06-2015 07:45 PM
