Confused with rear o2 elimination/simulator wiring
#1
Registered User
Thread Starter
Join Date: Jan 2004
Location: Maryland
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
Confused with rear o2 elimination/simulator wiring
Hey guys,
I need to "eliminate" my rear o2 on my 85 runner as I swapped in a 5vz-fe 3.4L and put a blower on it and the exhaust is very free flowing
I read the following write up:
http://www.vfaq.com/mods/O2bypass.html
but am confused on which wire to use in addition to my signal wire.
So do I put the 1 mega ohm resistor in my o2 signal wire which is the red one?
If so, then what is the other wire that I attach the 1 micro farad capacitor to?
THank you SO MUCH!!!!
I need to "eliminate" my rear o2 on my 85 runner as I swapped in a 5vz-fe 3.4L and put a blower on it and the exhaust is very free flowing
I read the following write up:
http://www.vfaq.com/mods/O2bypass.html
but am confused on which wire to use in addition to my signal wire.
So do I put the 1 mega ohm resistor in my o2 signal wire which is the red one?
If so, then what is the other wire that I attach the 1 micro farad capacitor to?
THank you SO MUCH!!!!
#2
http://www.vfaq.com/mods/O2bypass.html. Try this.
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Just Differentials
5
06-13-2022 07:40 PM
Scotttekoch
General Electrical & Lighting Related Topics
5
09-28-2015 10:30 PM
Boomer8404
86-95 Trucks & 4Runners
0
09-24-2015 01:12 PM
zz_denis
95.5-2004 Tacomas & 96-2002 4Runners
2
09-06-2015 03:43 PM