MAF postion in relation to TB
#1
Registered User
Thread Starter
MAF postion in relation to TB
I'm redoing a messed up intake system. The previous intake consisted of ten inches of tube coming off the TB and connecting to a cone filter that sat right above the exhaust manifold. Now I have added a bend and about twelve inches of tube to get the filter down where it should be. However, the MAF is way back at the TB end. Rerouting it would be a pain. The question is, will having the MAF by the TB instead of closer to the filter affect its reading? If so, is it enough to worry about?
Thread
Thread Starter
Forum
Replies
Last Post
zytra
86-95 Trucks & 4Runners
32
01-24-2019 03:16 PM
zombie_barbarossa
95.5-2004 Tacomas & 96-2002 4Runners
3
10-02-2015 10:54 PM